Why can't the toilet flush clean

summary

Like the toilet can not flush this disease will continue to appear in our lives, the home toilet is a very important functional area, we must all know, but he often has a variety of problems in life, like today's toilet problem. Toilet as an essential household building material in life, its use is also very important. Many friends will encounter such a problem: the toilet water is getting smaller and smaller, almost unable to achieve the effect of flushing away the dirt in the toilet, what is the reason? What else can be done?

Why can't the toilet flush clean

First: toilet water small, roughly have these several possibilities: 1, flange joint installation fashion deviation, water flow reduction! 2. The toilet itself has insufficient water pumping and water pressure. This reason is very complicated and troublesome. 3. Insufficient flushing water and water cut-off in residential area! 4. The long-term use leads to the contamination in the internal test of the down pipe, which leads to the water getting smaller.

Second: toilet water small solution: 1, carefully buy toilet: Based on the above reason analysis, so when buying toilet, we must pay attention to. Generally, the water pipe from the water tank to the ceramic tile is about 30 ~ 35cm, and their diameter is 110cm. At the very least, we must check them. Otherwise, we will be in great trouble. 2. The installation of the toilet is also a very important thing. It's best to supervise the whole process of the installation of the toilet. It's necessary to make sure that there are no mistakes in the installation position and method. Otherwise, if there are problems in the follow-up, it's no trouble. It's just to spend some money to dismantle and re install the toilet.

Third: there are two common reasons for the weak flushing of the toilet: 1. The side handle bracelet of the side press and side pull toilet is longer, which leads to the action of the water stop pad, but it stops water quickly. Solution: Please shorten it to appropriate. Or the top pressing rod of the top pressing toilet is low, which leads to the action of the water stop pad, but it stops water quickly. Solution: open the water tank cover, reverse, loosen the nut of pressure bar, and adjust the length of pressure bar to appropriate.

matters needing attention

In general, it's good to brush directly with the toilet brush. If it's always easy to get dirty, a good toilet's ceramic glaze is better. Use a cheap toothpaste. Pay attention to the white one instead of the transparent one. Then use the common green or blue rough surface to scrub. If it hasn't been cleaned for a long time, you can gently wipe it with a steel ball. However, the use of steel balls and detergents, etc., will damage the ceramic glaze, it is recommended not to use.